Revell's Joey Saldana Sprint Car reveal
Revell's Joey Saldana Sprint Car reveal
This was my first but definitely not last Sprint Car. What a fun build! Thanks for looking!







Chris
Previous Build: Revell Joey Saldana Sprint Car
Current Build: Monogram Frank Iaconio Chevy Camero Pro-Stock
Next Build: ?
Previous Build: Revell Joey Saldana Sprint Car
Current Build: Monogram Frank Iaconio Chevy Camero Pro-Stock
Next Build: ?
-
- Chief Warrant Officer 5
- Posts: 2961
- Joined: Sun Mar 15, 2020 11:44 pm
- Location: Denver, Colorado
Re: Revell's Joey Saldana Sprint Car reveal
Nice pictures and a great build!
When my boys were little, I would take them to our local paved short track to watch the races. The nights with sprint car races were some of our favorites. After the races, the drivers would let the kids sit in their cars and hand out pictures. They thought that was the greatest thing ever.
When my boys were little, I would take them to our local paved short track to watch the races. The nights with sprint car races were some of our favorites. After the races, the drivers would let the kids sit in their cars and hand out pictures. They thought that was the greatest thing ever.
Re: Revell's Joey Saldana Sprint Car reveal
Very well done!
Re: Revell's Joey Saldana Sprint Car reveal
Thank Joe! That is really cool.. I grew up in the south where they raced these on the dirt and they would not let us in the pits. I bet they loved that.BigWall wrote: ↑Sun Jul 19, 2020 9:19 pm Nice pictures and a great build!
When my boys were little, I would take them to our local paved short track to watch the races. The nights with sprint car races were some of our favorites. After the races, the drivers would let the kids sit in their cars and hand out pictures. They thought that was the greatest thing ever.
Thanks @@aur0ra145 !
Thanks Mike!
Chris
Previous Build: Revell Joey Saldana Sprint Car
Current Build: Monogram Frank Iaconio Chevy Camero Pro-Stock
Next Build: ?
Previous Build: Revell Joey Saldana Sprint Car
Current Build: Monogram Frank Iaconio Chevy Camero Pro-Stock
Next Build: ?
Re: Revell's Joey Saldana Sprint Car reveal
First sprint car build I have seen and it's a doozy





Re: Revell's Joey Saldana Sprint Car reveal
Ooooh dang, you nailed it brother, it looks great & that background is killer, what did you use for it? Can’t wait to see a few more of these in different liveries




- Twokidsnosleep
- General
- Posts: 18019
- Joined: Thu Aug 07, 2014 4:07 pm
- Location: BC,Canada
Re: Revell's Joey Saldana Sprint Car reveal
Nice build and great photography as well
The latter is where many fall down...build an awesome kit and then put blurry busy desk pics up
The background and lighting really set this car off well
Nice
The latter is where many fall down...build an awesome kit and then put blurry busy desk pics up
The background and lighting really set this car off well
Nice

Scott
On, Under or Near the Bench:
American Graffiti Ford Coupe
Headless Horseman...figure sig
1/72 Black Pearl Pirate Ship
On, Under or Near the Bench:
American Graffiti Ford Coupe
Headless Horseman...figure sig
1/72 Black Pearl Pirate Ship
Re: Revell's Joey Saldana Sprint Car reveal
I'm sorry I'm such a sh*^ty photographerTwokidsnosleep wrote: ↑Mon Jul 20, 2020 4:47 am Nice build and great photography as well
The latter is where many fall down...build an awesome kit and then put blurry busy desk pics up
The background and lighting really set this car off well
Nice![]()



Re: Revell's Joey Saldana Sprint Car reveal
Yep, that's great work, cool car too!
Portfolio
Click here
Click here
Re: Revell's Joey Saldana Sprint Car reveal








Re: Revell's Joey Saldana Sprint Car reveal
Thanks digger! I thoroughly enjoyed building it.
Thanks Jesse! Alex Kustov posted his photo setup over at another forum and I got my ideas from him. I used a long piece of black paper that I taped to the wall and let it roll off the desk so it is the floor and backdrop of the shot. The car is actually a couple of feet away from the wall where the paper gently rolls down onto the table. My favorites were the first and last one and I think I was using a small over head LED lamp but I can't remember if I had it right on top or a little in front. The second time I tried to recreate it, I didn't like it.. it was too dark. But most of the shots are with my overhead LED shop light that is very bright about three feet above it. I'm going to perfect that little LED lamp next time because I like it the best. And on the last shot I had my iPhone's camera on the bottom instead of the top while in Landscape mode. I love that shot.. have to do more that way. I just rest the phone on the table in front of the car.
Thanks Scott! I was really impressed with the way these came out.. but still need to perfect it. The best pics were the day before when I didn't notice I didn't have the hood all the way down. Actually the first photo is from that shoot and you can see the hood is crooked.Twokidsnosleep wrote: ↑Mon Jul 20, 2020 4:47 am Nice build and great photography as well
The latter is where many fall down...build an awesome kit and then put blurry busy desk pics up
The background and lighting really set this car off well
Nice![]()
Thanks Gary!! Yeah, I love these cars.. most of my love for race cars comes for the way they look more than how they are used.
Thanks Andy! Glad you are back!
Chris
Previous Build: Revell Joey Saldana Sprint Car
Current Build: Monogram Frank Iaconio Chevy Camero Pro-Stock
Next Build: ?
Previous Build: Revell Joey Saldana Sprint Car
Current Build: Monogram Frank Iaconio Chevy Camero Pro-Stock
Next Build: ?
Re: Revell's Joey Saldana Sprint Car reveal
Great tips mate, its something I really need to improve on during my build but especially for the reveal. I will definitely use this advice for my next reveal, thanks matejchrisf wrote: ↑Mon Jul 20, 2020 4:42 pm Thanks Jesse! Alex Kustov posted his photo setup over at another forum and I got my ideas from him. I used a long piece of black paper that I taped to the wall and let it roll off the desk so it is the floor and backdrop of the shot. The car is actually a couple of feet away from the wall where the paper gently rolls down onto the table. My favorites were the first and last one and I think I was using a small over head LED lamp but I can't remember if I had it right on top or a little in front. The second time I tried to recreate it, I didn't like it.. it was too dark. But most of the shots are with my overhead LED shop light that is very bright about three feet above it. I'm going to perfect that little LED lamp next time because I like it the best. And on the last shot I had my iPhone's camera on the bottom instead of the top while in Landscape mode. I love that shot.. have to do more that way. I just rest the phone on the table in front of the car.

Amazing how some simple techniques can make a photo look 100x better.
Re: Revell's Joey Saldana Sprint Car reveal
What a cool little build. Came out great!
Previously on the bench: Tamiya 1/20 McLaren MP4/4 - Top Studio super detail set.
Current build: Tamiya 1/12 Honda VF750R & Hobby Design set
Current build: Tamiya 1/12 Honda VF750R & Hobby Design set
Re: Revell's Joey Saldana Sprint Car reveal
No problem!Bdiddy wrote: ↑Tue Jul 21, 2020 8:45 amGreat tips mate, its something I really need to improve on during my build but especially for the reveal. I will definitely use this advice for my next reveal, thanks matejchrisf wrote: ↑Mon Jul 20, 2020 4:42 pm Thanks Jesse! Alex Kustov posted his photo setup over at another forum and I got my ideas from him. I used a long piece of black paper that I taped to the wall and let it roll off the desk so it is the floor and backdrop of the shot. The car is actually a couple of feet away from the wall where the paper gently rolls down onto the table. My favorites were the first and last one and I think I was using a small over head LED lamp but I can't remember if I had it right on top or a little in front. The second time I tried to recreate it, I didn't like it.. it was too dark. But most of the shots are with my overhead LED shop light that is very bright about three feet above it. I'm going to perfect that little LED lamp next time because I like it the best. And on the last shot I had my iPhone's camera on the bottom instead of the top while in Landscape mode. I love that shot.. have to do more that way. I just rest the phone on the table in front of the car.![]()
Amazing how some simple techniques can make a photo look 100x better.
Thanks! I loved building it.
Chris
Previous Build: Revell Joey Saldana Sprint Car
Current Build: Monogram Frank Iaconio Chevy Camero Pro-Stock
Next Build: ?
Previous Build: Revell Joey Saldana Sprint Car
Current Build: Monogram Frank Iaconio Chevy Camero Pro-Stock
Next Build: ?
-
- Private
- Posts: 5
- Joined: Mon Jul 20, 2020 2:55 pm
Re: Revell's Joey Saldana Sprint Car reveal
Chris,
TY so much for posting pics of this build, WOW does it bring back memories for me bud. When I was younger, my Uncle Ron Batt used to race all the time at the Chico, CA "Silver Dollar Speedway" here. He ran a sprint car exactly like this as #15 I think... fans all called it the "BATT MOBILE"... LOL. I remember helping him build his secondary engine in his shop many times.
Your build is amazing, very pristine and super finely detailed (especially the engine area). I hope to be able to build cars like you do someday with your help... if you would have me in your ear. The only thing I would probably add, if it were me, is some mud weathering on the tires and the fender cowlings... possibly some rust effects on the manifolds? Our track here is a dirt oval, stuff gets muddy LOL. I would also crank the front wheels to the left as if it were ripping up one of the turns.
Man, I just LOVE this build... and what a great job you did on it Chris
. I can't wait to see more of your work buddy and hope you are always doing well Sir 
Lloyd
TY so much for posting pics of this build, WOW does it bring back memories for me bud. When I was younger, my Uncle Ron Batt used to race all the time at the Chico, CA "Silver Dollar Speedway" here. He ran a sprint car exactly like this as #15 I think... fans all called it the "BATT MOBILE"... LOL. I remember helping him build his secondary engine in his shop many times.
Your build is amazing, very pristine and super finely detailed (especially the engine area). I hope to be able to build cars like you do someday with your help... if you would have me in your ear. The only thing I would probably add, if it were me, is some mud weathering on the tires and the fender cowlings... possibly some rust effects on the manifolds? Our track here is a dirt oval, stuff gets muddy LOL. I would also crank the front wheels to the left as if it were ripping up one of the turns.
Man, I just LOVE this build... and what a great job you did on it Chris


Lloyd
Re: Revell's Joey Saldana Sprint Car reveal
Thanks Lloyd! This kit is inexpensive.. you should pick up a couple or more while they are still producing them. You could even get some custom decals made to match your uncles... which is a very cool story itself. This is only my 10th model so I am not that good yet. HPIGuy on YT did this car a couple of months ago and used tile grout to dirty it up.. came out great. I thought about it, and is why I didn't scuff my tires up but it looked so good I decided to keep it like it is. I've seen other guys do the wheels and tires cranked over but I'm not really sure how they did it. I'm not that good yetRainingSpain wrote: ↑Wed Jul 22, 2020 1:29 am Chris,
TY so much for posting pics of this build, WOW does it bring back memories for me bud. When I was younger, my Uncle Ron Batt used to race all the time at the Chico, CA "Silver Dollar Speedway" here. He ran a sprint car exactly like this as #15 I think... fans all called it the "BATT MOBILE"... LOL. I remember helping him build his secondary engine in his shop many times.
Your build is amazing, very pristine and super finely detailed (especially the engine area). I hope to be able to build cars like you do someday with your help... if you would have me in your ear. The only thing I would probably add, if it were me, is some mud weathering on the tires and the fender cowlings... possibly some rust effects on the manifolds? Our track here is a dirt oval, stuff gets muddy LOL. I would also crank the front wheels to the left as if it were ripping up one of the turns.
Man, I just LOVE this build... and what a great job you did on it Chris. I can't wait to see more of your work buddy and hope you are always doing well Sir
Lloyd

If you need any help or advice just ask away and I'll answer what I can or let those more experienced than me answer here

Chris
Previous Build: Revell Joey Saldana Sprint Car
Current Build: Monogram Frank Iaconio Chevy Camero Pro-Stock
Next Build: ?
Previous Build: Revell Joey Saldana Sprint Car
Current Build: Monogram Frank Iaconio Chevy Camero Pro-Stock
Next Build: ?
- barryf1fan
- Sergeant Major of the Army
- Posts: 1175
- Joined: Thu Jul 19, 2018 8:41 pm
- Location: Prev OK, now St. Cloud, FL
Re: Revell's Joey Saldana Sprint Car reveal

Don't know how I missed the reveal pics??

But man, what a freaking nice kit you did, Chris! I agree with you - I think it looks great just like that!
Nice work, man, and can't wait to see the next one.


All of us get lost in the darkness, Dreamers learn to steer by the stars,
All of us do time in the gutter, Dreamers turn to look at the cars.
On the Bench: Fujimi Porsche 911 GT3 x2 - Flying Lizard 2011 GT3 cars, #80 & #81
Up Next: 1/20 Tamiya McLaren MP4/5 F1
All of us do time in the gutter, Dreamers turn to look at the cars.
On the Bench: Fujimi Porsche 911 GT3 x2 - Flying Lizard 2011 GT3 cars, #80 & #81
Up Next: 1/20 Tamiya McLaren MP4/5 F1
Re: Revell's Joey Saldana Sprint Car reveal
Thanks Barry.. I appreciate it. Can't wait to see what you do with yoursbarryf1fan wrote: ↑Wed Jul 22, 2020 5:43 pm
Don't know how I missed the reveal pics??![]()
But man, what a freaking nice kit you did, Chris! I agree with you - I think it looks great just like that!
Nice work, man, and can't wait to see the next one.![]()
![]()

Chris
Previous Build: Revell Joey Saldana Sprint Car
Current Build: Monogram Frank Iaconio Chevy Camero Pro-Stock
Next Build: ?
Previous Build: Revell Joey Saldana Sprint Car
Current Build: Monogram Frank Iaconio Chevy Camero Pro-Stock
Next Build: ?