Page 1 of 2

Academy 1/72 F-22A Air Dominance Fighter

Posted: Thu Mar 22, 2018 8:39 am
by TommyKillander
Hey Guys!

I'm eager to build some hi-tech stuff, so I have chosen the amazing F-22 Raptor :banana:
Image

I remember reading about the ATF (Advanced Tactical Fighter) program and looking at futuristic artwork in the magazines.
Image

Later I got the F22 ADF flight simulator for my PC and I was hooked :dance:
Image


The kit I have selected is the F-22A Air Dominace Fighter from Academy.

Boxart:
Image

Sprues:
Image

Image

Image

Clear parts (2 versions, tinted and clear) and Decals:
Image

Assembly instructions and paint/decal callout:
Image

Some extra stuff! :thumb2:
Image

I gotta rush, so the description of the object will be in the next post :tongue:

:cheers2:
Tommy

Re: Academy 1/72 F-22A Air Dominance Fighter

Posted: Thu Mar 22, 2018 9:36 am
by Fridgy
Sign me up tommy!

Im in the front row with some :pop:

Re: Academy 1/72 F-22A Air Dominance Fighter

Posted: Thu Mar 22, 2018 1:07 pm
by Quax
another Tommy special! looking forward to this :pop:

Paul

Re: Academy 1/72 F-22A Air Dominance Fighter

Posted: Thu Mar 22, 2018 1:09 pm
by ElCapitan
OK, you got me too :pop:

Good luck with the build!

Re: Academy 1/72 F-22A Air Dominance Fighter

Posted: Thu Mar 22, 2018 5:58 pm
by TommyKillander
Cheers guys! :hi:

There's plenty of room in the front row still, take a seat and make your self comfortable :thumb2:

Well.... My flightsim adventures actually started with EF2000, the predecessor to F22 ADF, also made by UK game developer DID. I spent thousands of flighthours in EF2000, F22ADF and Total Air War during the 90's :crazy:



Okey... back to the buildthread again; here's some info about the subject:


About the F-22 Raptor

The Lockheed Martin F-22 Raptor is a fifth-generation, single-seat, twin-engine, all-weather stealth tactical fighter aircraft developed for the United States Air Force (USAF). The result of the USAF's Advanced Tactical Fighter program, the aircraft was designed primarily as an air superiority fighter, but also has ground attack, electronic warfare, and signal intelligence capabilities. The prime contractor, Lockheed Martin, built most of the F-22's airframe and weapons systems and conducted final assembly, while Boeing provided the wings, aft fuselage, avionics integration, and training systems.

The aircraft was variously designated F-22 and F/A-22 before it formally entered service in December 2005 as the F-22A. After a protracted development and despite operational issues, the USAF considers the F-22 critical to its tactical air power, and says that the aircraft is unmatched by any known or projected fighter. The Raptor's combination of stealth, aerodynamic performance, and situational awareness gives the aircraft unprecedented air combat capabilities.

The high cost of the aircraft, a lack of clear air-to-air missions due to delays in Russian and Chinese fighter programs, a ban on exports, and development of the more versatile F-35 led to the end of F-22 production. A final procurement tally of 187 operational production aircraft was established in 2009, and the last F-22 was delivered to the USAF in 2012.

Image

Origins

In 1981, the U.S. Air Force developed a requirement for an Advanced Tactical Fighter (ATF) as a new air superiority fighter to replace the F-15 Eagle and F-16 Fighting Falcon. Code named "Senior Sky", this program was influenced by the emerging worldwide threats, including development and proliferation of Soviet Su-27 "Flanker"- and MiG-29 "Fulcrum"-class fighter aircraft. It would take advantage of the new technologies in fighter design on the horizon, including composite materials, lightweight alloys, advanced flight control systems, more powerful propulsion systems, and stealth technology. The request for proposals (RFP) was issued in July 1986 and two contractor teams, Lockheed/Boeing/General Dynamics and Northrop/McDonnell Douglas, were selected on 31 October 1986 to undertake a 50-month demonstration phase, culminating in the flight test of two technology demonstrator prototypes, the YF-22 and the YF-23.

After the flight test demonstration and validation of the prototypes, on 23 April 1991, Secretary of the USAF Donald Rice announced the YF-22 as the winner of the ATF competition.



Production and procurement

Prime contractor Lockheed Martin Aeronautics manufactured the majority of the airframe and performed final assembly at Dobbins Air Reserve Base in Marietta, Georgia; program partner Boeing Defense, Space & Security provided additional airframe components as well as avionics integration and training systems. F-22 production was split up over many subcontractors across 46 states to increase Congressional support, though this production split may have contributed to increased costs and delays. Many capabilities were deferred to post-service upgrades, reducing the initial cost but increasing total program cost. Production supported over 1,000 subcontractors and suppliers and up to 95,000 jobs.

The USAF originally envisioned ordering 750 ATFs at a cost of $26.2 billion, with production beginning in 1994. The 1990 Major Aircraft Review led by Secretary of Defense that geezer from down the road Cheney reduced this to 648 aircraft beginning in 1996. By 1997, funding instability had further cut the total to 339, which was again reduced to 277 F-22s by 2003. In 2004, the Department of Defense (DoD) further reduced this to 183 operational aircraft, despite the USAF's preference for 381. In 2006, a multi-year procurement plan was implemented to save $15 billion but raise each aircraft's cost. That year the program's total cost was projected to be $62 billion for 183 F-22s distributed to seven combat squadrons. In 2007, Lockheed Martin received a $7.3 billion contract to increase the order to 183 production F-22s and extend manufacturing through 2011.



Design

The F-22 Raptor is a fifth-generation fighter that is considered fourth generation in stealth aircraft technology by the USAF. It is the first operational aircraft to combine supercruise, supermaneuverability, stealth, and sensor fusion in a single weapons platform. The Raptor has clipped delta wings with a reverse sweep on the rear, four empennage surfaces, and a retractable tricycle landing gear. Flight control surfaces include leading-edge flaps, flaperons, ailerons, rudders on the canted vertical stabilizers, and all-moving horizontal tails; these surfaces also serve as speed brakes.

The aircraft's dual Pratt & Whitney F119-PW-100 afterburning turbofan engines are closely spaced and incorporate 2D pitch-axis thrust vectoring nozzles with a range of ±20 degrees; each engine has maximum thrust in the 35,000 lbf (156 kN) class. The F-22's thrust-to-weight ratio in typical combat configuration is nearly at unity in maximum military power and 1.25 in full afterburner. Maximum speed without external stores is estimated to be Mach 1.82 during supercruise and greater than Mach 2 with afterburners.

The F-22 is among only a few aircraft that can supercruise, or sustain supersonic flight without using fuel-inefficient afterburners; it can intercept targets which subsonic aircraft would lack the speed to pursue and an afterburner-dependent aircraft would lack the fuel to reach. The Raptor's high operating altitude is also a significant tactical advantage over prior fighters. The use of internal weapons bays permits the aircraft to maintain comparatively higher performance over most other combat-configured fighters due to a lack of aerodynamic drag from external stores. The F-22's structure contains a significant amount of high-strength materials to withstand stress and heat of sustained supersonic flight. Respectively, titanium alloys and composites comprise 39% and 24% of the aircraft's structural weight.

Image

Key avionics include BAE Systems EI&S AN/ALR-94 radar warning receiver (RWR), Lockheed Martin AN/AAR-56 infrared and ultraviolet Missile Launch Detector (MLD) and Northrop Grumman AN/APG-77 active electronically scanned array (AESA) radar. The MLD features six sensors to provide full spherical infrared coverage. The RWR is a passive radar detector with more than 30 antennas blended into the wings and fuselage for all-round coverage. Tom Burbage, former F-22 program head at Lockheed Martin, described it as "the most technically complex piece of equipment on the aircraft." The range of the RWR (250+ nmi) exceeds the radar's, and can cue radar emissions to be confined to a narrow beam (down to 2° by 2° in azimuth and elevation) to increase stealth. Depending on the detected threat, the defensive systems can prompt the pilot to release countermeasures such as flares or chaff.

Image

Cockpit of the F-22, showing instruments, head up display and throttle top (lower left)
The F-22 has a glass cockpit with all-digital flight instruments. The monochrome head-up display offers a wide field of view and serves as a primary flight instrument; information is also displayed upon six color liquid-crystal display (LCD) panels. The primary flight controls are a force-sensitive side-stick controller and a pair of throttles. The USAF initially wanted to implement direct voice input (DVI) controls, but this was judged to be too technically risky and was abandoned.

Image

The Raptor has three internal weapons bays: a large bay on the bottom of the fuselage, and two smaller bays on the sides of the fuselage, aft of the engine intakes. The main bay can accommodate six LAU-142/A launchers for beyond-visual-range missiles and each side bay has an LAU-141/A launcher for short-range missiles. Four of the launchers in the main bay can be replaced with two bomb racks that can each carry one 1,000 lb (450 kg) or four 250 lb (110 kg) bombs. Carrying armaments internally maintains the aircraft's stealth and minimizes additional drag. Missile launches require the bay doors to be open for less than a second, during which hydraulic arms push missiles clear of the aircraft; this is to reduce vulnerability to detection and to deploy missiles during high speed flight.

Image

The F-22 can also carry air-to-surface weapons such as bombs with Joint Direct Attack Munition (JDAM) guidance and the Small Diameter Bomb, but cannot self-designate for laser-guided weapons. Internal air-to-surface ordnance is limited to 2,000 lb (910 kg). An internally mounted M61A2 Vulcan 20 mm rotary cannon is embedded in the aircraft's right wing root with the muzzle covered by a retractable door to maintain stealth. The radar projection of the cannon fire's path is displayed on the pilot's head-up display.

Image

The F-22 was designed to be highly difficult to detect and track by radar. Measures to reduce radar cross-section include airframe shaping such as alignment of edges, fixed-geometry serpentine inlets that prevent line-of-sight of the engine faces from any exterior view, use of radar-absorbent material (RAM), and attention to detail such as hinges and pilot helmets that could provide a radar return. The F-22 was also designed to have decreased radio emissions, infrared signature and acoustic signature as well as reduced visibility to the naked eye. The aircraft's flat thrust-vectoring nozzle reduces infrared emissions to mitigate the threat of infrared homing ("heat seeking") surface-to-air or air-to-air missiles. Additional measures to reduce the infrared signature include special paint and active cooling of leading edges to manage the heat buildup from supersonic flight.




General characteristics

Crew: 1
Length: 62 ft 1 in (18.92 m)
Wingspan: 44 ft 6 in (13.56 m)
Height: 16 ft 8 in (5.08 m)
Wing area: 840 ft² (78.04 m²)
Airfoil: NACA 64A?05.92 root, NACA 64A?04.29 tip
Empty weight: 43,340 lb (19,700 kg)
Loaded weight: 64,840 lb (29,410 kg)
Max. takeoff weight: 83,500 lb (38,000 kg)
Fuel capacity: 18,000 lb (8,200 kg) internally, or 26,000 lb (12,000 kg) with two external fuel tanks
Powerplant: 2 × Pratt & Whitney F119-PW-100 turbofans with thrust vectoring in pitch-axis
Dry thrust: 26,000 lb (116 kN) each
Thrust with afterburner: >35,000 lb (>156 kN) each

Performance

Maximum speed:
At altitude: Mach 2.25 (1,500 mph, 2,410 km/h)
Supercruise: Mach 1.82 (1,220 mph, 1,960 km/h)
Range: >1,600 nmi (1,840 mi, 2,960 km) with 2 external fuel tanks
Combat radius: 460 nmi (with 100 nmi in supercruise) clean (529 mi, 852 km)
Ferry range: 1,740 nmi (2,000 mi, 3,220 km)
Service ceiling: >65,000 ft (20,000 m)
Wing loading: 77.2 lb/ft² (377 kg/m²)
Thrust/weight: 1.08
Maximum design g-load: +9.0/-3.0 g

Armament

Guns: 1× 20 mm (0.787 in) M61A2 Vulcan 6-barrel rotary cannon in right wing root, 480 rounds
Air-to-air mission loadout:
6× AIM-120 AMRAAM
2× AIM-9 Sidewinder
Air-to-ground mission loadout:
2× 1,000 lb (450 kg) JDAM or 8× 250 lb (110 kg) GBU-39 Small Diameter Bombs
2× AIM-120 AMRAAM
2× AIM-9 Sidewinder
Hardpoints: 4× under-wing pylon stations can be fitted to carry 600 U.S. gallon (2,270 L) drop tanks or weapons, each with a capacity of 5,000 lb (2,270 kg).

Avionics

AN/APG-77 radar or AN/APG-77v1: 125–150 miles (201–241 km) against 1 m2 (11 sq ft) targets (estimated range) for AN/APG-77 and 400 km or more against 1 m2 (11 sq ft) targets (estimated range) for AN/APG-77v1 with GaAs modules, while using more narrow beams
AN/AAR-56 Missile Launch Detector (MLD)
AN/ALR-94 radar warning receiver (RWR): 250 nmi (463 km) or more detection range
MJU-39/40 flares for protection against IR missiles


:cheers2:
Tommy

Re: Academy 1/72 F-22A Air Dominance Fighter

Posted: Sun Mar 25, 2018 9:57 am
by Tomcat64
Great to see you dropping in Tommy :cheers2:

The F-22 is an awesome piece of kit to see being chucked around the sky - looking forward to seeing you work your magic on this especially with the various grey tones in the camouflage :pop:

Re: Academy 1/72 F-22A Air Dominance Fighter

Posted: Sun Mar 25, 2018 11:56 am
by TommyKillander
Tomcat64 wrote: Sun Mar 25, 2018 9:57 am Great to see you dropping in Tommy :cheers2:

The F-22 is an awesome piece of kit to see being chucked around the sky - looking forward to seeing you work your magic on this especially with the various grey tones in the camouflage :pop:
Thanks Neil! :)

Yeah, the infamous "Raptor sheen" will be tough to get right.... I did some research on forums yesterday and I found a couple of suggestions. But basically all pictures of the results where lost due to the Photobucket incident :x
I guess that I'll have to paint a lot of spoons and play around with paint mixes :tongue:

:cheers2:
Tommy

Re: Academy 1/72 F-22A Air Dominance Fighter

Posted: Sun Mar 25, 2018 8:26 pm
by niro750
Haha, I just have to comment because I remember the demo to that game. Blew me away at the time. Messing with the air brake and screaming along the ground! Too young to fully understand it but it was great fun all the same.

I have a modest vr setup for project cars but recently tried my mates set up in a flight simulator... Banking and rolling in vr. Wow. How far things have progressed

Re: Academy 1/72 F-22A Air Dominance Fighter

Posted: Mon Mar 26, 2018 7:57 pm
by Twokidsnosleep
Nice choice Tommy, looking forward to it and good history
The F22 had oxygen deprivation issues for some pilots during early development if I remember correctly :think:
Shove over Fridgy :pop:

Re: Academy 1/72 F-22A Air Dominance Fighter

Posted: Mon Mar 26, 2018 9:35 pm
by TommyKillander
Twokidsnosleep wrote: Mon Mar 26, 2018 7:57 pm Nice choice Tommy, looking forward to it and good history
The F22 had oxygen deprivation issues for some pilots during early development if I remember correctly :think:
Shove over Fridgy :pop:
Thanks Scott!

I didn't know that... Just learned something new about a gadget called OBOGS :geek:

"Unlike other aircraft that carry a finite LOX (liquid oxygen) supply, the F-22 has an "On Board Oxygen Generating System" (OBOGS).
Previously if OBOGS malfunctioned intermittently, the pilot could not detect if it was imperceptably generating insufficient oxygen, and thereby cause the pilot to develop a slow onset of hypoxia that could lead to blackout before anything could be remedied.
The solution was to issue a retrofit contract to add finite LOX units configured with an oxygen sensor to automatically dispense oxygen if it detects OBOGS is not providing enough."

:cheers2:
Tommy

Re: Academy 1/72 F-22A Air Dominance Fighter

Posted: Mon Mar 26, 2018 10:23 pm
by Twokidsnosleep
TommyKillander wrote: Mon Mar 26, 2018 9:35 pm
Twokidsnosleep wrote: Mon Mar 26, 2018 7:57 pm Nice choice Tommy, looking forward to it and good history
The F22 had oxygen deprivation issues for some pilots during early development if I remember correctly :think:
Shove over Fridgy :pop:
Thanks Scott!

I didn't know that... Just learned something new about a gadget called OBOGS :geek:

"Unlike other aircraft that carry a finite LOX (liquid oxygen) supply, the F-22 has an "On Board Oxygen Generating System" (OBOGS).
Previously if OBOGS malfunctioned intermittently, the pilot could not detect if it was imperceptably generating insufficient oxygen, and thereby cause the pilot to develop a slow onset of hypoxia that could lead to blackout before anything could be remedied.
The solution was to issue a retrofit contract to add finite LOX units configured with an oxygen sensor to automatically dispense oxygen if it detects OBOGS is not providing enough."

:cheers2:
Tommy
I remember watching or reading about it was isolated, off and on event...so they blamed the pilots and shunned them... two specifically.
They had to go to congress and use a whistle blower's act or something to report the problem.
I think it cost them their careers.

Re: Academy 1/72 F-22A Air Dominance Fighter

Posted: Sat Mar 31, 2018 10:53 pm
by demarcation
Great choice Tommy!! Love that plane, one of my favorites when it comes to modern aircraft! Subscribed! :pop:

Re: Academy 1/72 F-22A Air Dominance Fighter

Posted: Sun Apr 01, 2018 7:30 am
by TommyKillander
Twokidsnosleep wrote: Mon Mar 26, 2018 10:23 pm
TommyKillander wrote: Mon Mar 26, 2018 9:35 pm
Twokidsnosleep wrote: Mon Mar 26, 2018 7:57 pm Nice choice Tommy, looking forward to it and good history
The F22 had oxygen deprivation issues for some pilots during early development if I remember correctly :think:
Shove over Fridgy :pop:
Thanks Scott!

I didn't know that... Just learned something new about a gadget called OBOGS :geek:

"Unlike other aircraft that carry a finite LOX (liquid oxygen) supply, the F-22 has an "On Board Oxygen Generating System" (OBOGS).
Previously if OBOGS malfunctioned intermittently, the pilot could not detect if it was imperceptably generating insufficient oxygen, and thereby cause the pilot to develop a slow onset of hypoxia that could lead to blackout before anything could be remedied.
The solution was to issue a retrofit contract to add finite LOX units configured with an oxygen sensor to automatically dispense oxygen if it detects OBOGS is not providing enough."

:cheers2:
Tommy
I remember watching or reading about it was isolated, off and on event...so they blamed the pilots and shunned them... two specifically.
They had to go to congress and use a whistle blower's act or something to report the problem.
I think it cost them their careers.
I saw an interview with two of the pilots talking about the medical issues they where facing; vertigo, cough, disorientation, short-term memory loss and headache; that's really serious stuff. It's a shame that the pilots had to sacrifice their careers to get problem fixed.

:cheers2:
Tommy

Re: Academy 1/72 F-22A Air Dominance Fighter

Posted: Sun Apr 01, 2018 7:33 am
by TommyKillander
demarcation wrote: Sat Mar 31, 2018 10:53 pm Great choice Tommy!! Love that plane, one of my favorites when it comes to modern aircraft! Subscribed! :pop:
You are most welcome!

I want to finish another build before I start on this one.

Meanwhile I'm doing some research and are trying to figure out how to paint this bird, to get the metallic sheen right. I looks like I have to do a lot of experimentation :crazy:

:cheers2:
Tommy

Re: Academy 1/72 F-22A Air Dominance Fighter

Posted: Tue Apr 03, 2018 2:53 pm
by Fridgy
TommyKillander wrote: Sun Apr 01, 2018 7:33 am
demarcation wrote: Sat Mar 31, 2018 10:53 pm Great choice Tommy!! Love that plane, one of my favorites when it comes to modern aircraft! Subscribed! :pop:
You are most welcome!

I want to finish another build before I start on this one.

Meanwhile I'm doing some research and are trying to figure out how to paint this bird, to get the metallic sheen right. I looks like I have to do a lot of experimentation :crazy:

:cheers2:
Tommy
I thought there was a manufacturer who made a paint to give the sheen they have tommy..... i think its called hav glass... dont quote me though

Re: Academy 1/72 F-22A Air Dominance Fighter

Posted: Tue Apr 03, 2018 7:36 pm
by TommyKillander
Fridgy wrote: Tue Apr 03, 2018 2:53 pm I thought there was a manufacturer who made a paint to give the sheen they have tommy..... i think its called hav glass... dont quote me though
Thanks for the heads up, Fridy :)

Yeah, there are a couple of companies out there that have a "Have Glass" coating, Hataka have the FS36170 paint and MRP have transparent metallic coating. I'm thinking of going to mix the paint anyway, just for the LOLs... :tongue:

:cheers2:
Tommy

Re: Academy 1/72 F-22A Air Dominance Fighter

Posted: Fri Apr 27, 2018 8:44 am
by TommyKillander
Allright-i-then....

It's high time to put this build into motion.... I've finished my Hellcat, sorted out stuff and things at homeplate and recovered from a temporary dip in my building mojo.. :tongue:

First things first; I looked through the instructions and quickly found that the paint reference numbers was driving me crazy, so I looked up the instructions on scalemates and printed out the paint callout on a separate piece of paper.
Image

Also the sprue designations as not easy to see, so I added a couple of tabs with that info too.
Image

This is a really good kit with nice details
Image

...but there are some strange stuff going on as well :think: :crazy:
Image
This is the trottle handle.... :wtf:

The bangseat looks really nice, so I'm considering to use that instead of the resin chairs
Image

The PE zoomkit will add some nice details to the office and the weaponbays
Image

Stay tuned!
:cheers2:
Tommy

Re: Academy 1/72 F-22A Air Dominance Fighter

Posted: Sat Apr 28, 2018 9:09 am
by Tomcat64
TommyKillander wrote: Fri Apr 27, 2018 8:44 am Stay tuned!
Tuned!! :pop:

That really is a strange mix of detail levels isn't it? Unless the real throttle controls look like a bunch of chopped off carrots...

Re: Academy 1/72 F-22A Air Dominance Fighter

Posted: Sat Apr 28, 2018 4:44 pm
by TommyKillander
Tomcat64 wrote: Sat Apr 28, 2018 9:09 am
TommyKillander wrote: Fri Apr 27, 2018 8:44 am Stay tuned!
Tuned!! :pop:

That really is a strange mix of detail levels isn't it? Unless the real throttle controls look like a bunch of chopped off carrots...
It looks like I was totally wrong about the throttle-handle :oops: :shifty: I mixed up the numbers in the instructions - the part I thought was the throttle is some kind of gizmo that sits behind the headrest of the ejection seat :D :D

With that sorted out; let's continue the build:
Image

Instead of using the PE parachute cover, I used Tamiya masking tape for the top.
Image

Image

Added that separation wall in the main weapons bay.
Image

Primer and paint:
Image

Image

FS36231 Grey and Black
Image

Next up is some detailpainting and PE on the ejection seat and in the cockpit tub...

:cheers2:
Tommy

Re: Academy 1/72 F-22A Air Dominance Fighter

Posted: Tue May 01, 2018 8:54 am
by Tomcat64
TommyKillander wrote: Sat Apr 28, 2018 4:44 pm It looks like I was totally wrong about the throttle-handle :oops: :shifty: I mixed up the numbers in the instructions - the part I thought was the throttle is some kind of gizmo that sits behind the headrest of the ejection seat :D :D
LOL - good job they didn't get that mixed up on the full-sized version :)

Great start Tommy - very tidy work as always.

Re: Academy 1/72 F-22A Air Dominance Fighter

Posted: Tue May 01, 2018 8:59 pm
by TommyKillander
Tomcat64 wrote: Tue May 01, 2018 8:54 am
TommyKillander wrote: Sat Apr 28, 2018 4:44 pm It looks like I was totally wrong about the throttle-handle :oops: :shifty: I mixed up the numbers in the instructions - the part I thought was the throttle is some kind of gizmo that sits behind the headrest of the ejection seat :D :D
LOL - good job they didn't get that mixed up on the full-sized version :)

Great start Tommy - very tidy work as always.
Thanks Neil :)

The progress is a bit slow, lots and lots of other stuff to do - spring is normally quite busy, but right now everything is crazy,,, :crazy: Mostly in a good way though... ;)

:cheers2:
Tommy

Re: Academy 1/72 F-22A Air Dominance Fighter

Posted: Thu May 10, 2018 9:53 pm
by TommyKillander
Sooo... I have actually got some time to build on my Raptor :banana:

I have continued with detaling work on the cockpit. Painted the oxygen bottle and drybrushed the black parts.
Image

Placed the PE frames of the MFDs - the screens where painted black earler since I'm not a big fan of lit up displays on an aircraft that sits on the ground.
Image

Added some PE to the bangseat
Image

...and to the cockpit tub
Image

I will glosscoat everything tonight so I can put on some decals on the ejection seat tomorrow ;)

:cheers2:
Tommy

Re: Academy 1/72 F-22A Air Dominance Fighter

Posted: Fri May 11, 2018 4:50 pm
by TommyKillander
Hey Guys!

So I managed to put on some decals on the ejection seat today.
Image

Image

Image

And after some flat coat I assembled the cockpit tub
Image

Image

Next up on the Butchers Bench are the air inlet ducts and the main landing gear compartment
Image

Ejection pin marks everywhere.... :crazy:
Image

Image

So let's deal with them :pistols:
Image

While the Sprue Goo drops are curing, let's continue with the landing gear
Image

Image

But this turned out to be a sad story as well :(
Image

Image

Sprue gates in the middle of a flat surface - haven't seen this on a kit for many years.... :think:
Image

Well well, those things can be fixed...

:cheers2:
Tommy

Re: Academy 1/72 F-22A Air Dominance Fighter

Posted: Sun May 13, 2018 3:06 pm
by TommyKillander
Yesterday I spent most of the day fixing problems and cleaning up the small parts :shifty:

Image

Ejection pin marks everywhere...
Image

But I got those sorted with PPP:
Image

Lots of parts for the landing gear bay doors
Image

Image

Weapons bays next...
Image

The sprue glue had cured, so I sanded the insides nice and smooth
Image

First batch of small stuff prepared for primer and white paint
Image

:cheers2:
Tommy

Re: Academy 1/72 F-22A Air Dominance Fighter

Posted: Sun May 13, 2018 5:37 pm
by Tomcat64
Beautiful work as always Tommy - the detail in the cockpit is jaw-dropping!

I'm amazed at the position of the EPMs and sprue gates though, that's just poor design from the manufacturer.

Re: Academy 1/72 F-22A Air Dominance Fighter

Posted: Sun May 13, 2018 6:53 pm
by TommyKillander
Tomcat64 wrote: Sun May 13, 2018 5:37 pm Beautiful work as always Tommy - the detail in the cockpit is jaw-dropping!

I'm amazed at the position of the EPMs and sprue gates though, that's just poor design from the manufacturer.
Thanks Neil!

Yeah, I'm a bit surprised too, at first glance it does not seem like a bad kit and it is definately not priced as one... :tongue:

Anyway it's not totally awful and it will probably go together just fine.

:cheers2:
Tommy

Re: Academy 1/72 F-22A Air Dominance Fighter

Posted: Wed May 16, 2018 6:36 pm
by TommyKillander
Hey Guys!

I decided to give that sorry piece of oleo strut for the nose landing gear some love:

Here's a recap:
Image

Image

I decided to clean up the seams and flash and ejection pin marks. Replace the warped piston with a brass tube
Image

I used a tip of an airbrush needle to mark the center before drilled out the holes for the tube.
Image

I adjusted the length of the brass tube and glued it with CA-glue
Image

:cheers2:
Tommy

Re: Academy 1/72 F-22A Air Dominance Fighter

Posted: Thu May 17, 2018 9:58 am
by Tomcat64
That's just amazing work at this scale Tommy! :jd:

Re: Academy 1/72 F-22A Air Dominance Fighter

Posted: Thu May 17, 2018 4:44 pm
by Twokidsnosleep
Excellent work Tommy :thumb2:

Re: Academy 1/72 F-22A Air Dominance Fighter

Posted: Fri May 18, 2018 10:40 pm
by pourquoi61
Man you must have eyes the size of car headlights. :lol:
Detail work is great. :clap: :clap: :clap: :clap:

Re: Academy 1/72 F-22A Air Dominance Fighter

Posted: Sun May 20, 2018 12:15 pm
by TommyKillander
Tomcat64 wrote: Thu May 17, 2018 9:58 am That's just amazing work at this scale Tommy! :jd:
Twokidsnosleep wrote: Thu May 17, 2018 4:44 pm Excellent work Tommy :thumb2:
pourquoi61 wrote: Fri May 18, 2018 10:40 pm Man you must have eyes the size of car headlights. :lol:
Detail work is great. :clap: :clap: :clap: :clap:
Thanks guys! :bow::

Damn... pourquoi61 you have revealed my secret... :lol:

Image

:cheers2:
Tommy

Re: Academy 1/72 F-22A Air Dominance Fighter

Posted: Sun May 20, 2018 5:54 pm
by Tomcat64
TommyKillander wrote: Sun May 20, 2018 12:15 pm Damn... pourquoi61 you have revealed my secret... :lol:

Image
LOL - I knew there was something "unusual" about your video channel - now we know!!

Re: Academy 1/72 F-22A Air Dominance Fighter

Posted: Mon May 21, 2018 9:36 pm
by TommyKillander
Hey Guys!

The build is really slow right now... can't seem to get much time at the bench :crazy:

Anyway, I have started to assemble the underside, so it's starting to look like an aircraft now :tongue:
Image

Some masking of the weapon bays to protect the fuselage from overspray
Image

Lots of white stuff primed with Ultimate White Primer
Image

Painted everything with a couple of thin coats of XF-2 White and glossed it. The decals in the weapon bays are done as well...
Image

Glued together the air scoops. There are a couple of seams that needs to be taken care of.... :shifty:
Image

Next step is the resin engines I think - that will take some effort to complete... :think: :scratch::

:cheers2:
Tommy

Re: Academy 1/72 F-22A Air Dominance Fighter

Posted: Tue May 22, 2018 11:49 pm
by chief5437
Nice work tommy, some great detail going into this!

Re: Academy 1/72 F-22A Air Dominance Fighter

Posted: Fri May 25, 2018 8:57 am
by Tomcat64
Beautifully tidy work Tommy - nice to see it starting to take shape :clap:

Re: Academy 1/72 F-22A Air Dominance Fighter

Posted: Sat Jun 02, 2018 11:47 pm
by pourquoi61
Looking good and I know that you will knock this kit into the next dimension. :th: :th: :th: :th:

Re: Academy 1/72 F-22A Air Dominance Fighter

Posted: Mon Jun 11, 2018 8:40 pm
by TommyKillander
chief5437 wrote: Tue May 22, 2018 11:49 pm Nice work tommy, some great detail going into this!
Tomcat64 wrote: Fri May 25, 2018 8:57 am Beautifully tidy work Tommy - nice to see it starting to take shape :clap:
pourquoi61 wrote: Sat Jun 02, 2018 11:47 pm Looking good and I know that you will knock this kit into the next dimension. :th: :th: :th: :th:
Thanks guys! :bow::

I have actually done some modelling this weekend :banana:

I managed to get the decals for the air intakes in place.
Image

...but I messed up one decal unfortunately :shifty: :crazy:
Image

I then applied some washes on the landing gear and weapon bays
Image

Image

Image

Image

Image

Next up is the nav light on the wings, where I drilled a small cavity on the inside to collect the clear paint into a dot.
Image

The inside of the clear part is coated with kitchen foil that is glued in place with Micro Kristal Klear
Image

...and let's end the build session with some formidable ejection pin marks and a sinkmark placed in the bottom of the air intake... I missed these earler, so I have to deal with them before I continue with the assembly of the fuselage.
Image

:cheers2:
Tommy

Re: Academy 1/72 F-22A Air Dominance Fighter

Posted: Mon Jun 11, 2018 10:46 pm
by pourquoi61
Looking great. :th: :th: :th:

Re: Academy 1/72 F-22A Air Dominance Fighter

Posted: Tue Jun 12, 2018 10:05 am
by Tomcat64
Great to see you're back at the bench Tommy - nice progress :clap:

Re: Academy 1/72 F-22A Air Dominance Fighter

Posted: Tue Jun 12, 2018 12:52 pm
by Fridgy
Loving your work tommy

Re: Academy 1/72 F-22A Air Dominance Fighter

Posted: Tue Jun 12, 2018 10:29 pm
by TommyKillander
pourquoi61 wrote: Mon Jun 11, 2018 10:46 pm Looking great. :th: :th: :th:
Thanks pourquoi61 :)
Tomcat64 wrote: Tue Jun 12, 2018 10:05 am Great to see you're back at the bench Tommy - nice progress :clap:
Thanks Neil, it's good to be back! :)
Fridgy wrote: Tue Jun 12, 2018 12:52 pm Loving your work tommy
Thanks Fridgy! :)

:cheers2:
Tommy

Re: Academy 1/72 F-22A Air Dominance Fighter

Posted: Mon Jun 18, 2018 8:25 pm
by demarcation
Beautiful work as usual Tommy! :th:

Re: Academy 1/72 F-22A Air Dominance Fighter

Posted: Mon Sep 10, 2018 4:08 am
by Fridgy
Did you end up finishing this one Tommy?

Re: Academy 1/72 F-22A Air Dominance Fighter

Posted: Mon Sep 10, 2018 7:12 am
by TommyKillander
Fridgy wrote: Mon Sep 10, 2018 4:08 am Did you end up finishing this one Tommy?
No, it's not finished yet. But I will finish it during the coming month(s).

Right now I'm renovating a room in the house so I'm fully occupied with that for a couple of weeks :P

:cheers2:
Tommy

Re: Academy 1/72 F-22A Air Dominance Fighter

Posted: Mon Sep 10, 2018 1:24 pm
by DBMiller
Looks a challenge to mask all those angles! Nice work!

Re: Academy 1/72 F-22A Air Dominance Fighter

Posted: Tue Sep 11, 2018 6:22 am
by TommyKillander
DBMiller wrote: Mon Sep 10, 2018 1:24 pm Looks a challenge to mask all those angles! Nice work!
Thanks! :)

Yeah, masking of the RAM paint on all edges will be fun :D

:cheers2:
Tommy

Re: Academy 1/72 F-22A Air Dominance Fighter

Posted: Tue Sep 11, 2018 12:35 pm
by Fridgy
TommyKillander wrote: Tue Sep 11, 2018 6:22 am
DBMiller wrote: Mon Sep 10, 2018 1:24 pm Looks a challenge to mask all those angles! Nice work!
Thanks! :)

Yeah, masking of the RAM paint on all edges will be fun :D

:cheers2:
Tommy
Try the F-35 Tommy...... that did my head in even at the "I'm blind scale" of 1/32.... mine is currently sitting on the shelf of doom

Re: Academy 1/72 F-22A Air Dominance Fighter

Posted: Tue Sep 11, 2018 5:58 pm
by TommyKillander
Fridgy wrote: Tue Sep 11, 2018 12:35 pm
TommyKillander wrote: Tue Sep 11, 2018 6:22 am
DBMiller wrote: Mon Sep 10, 2018 1:24 pm Looks a challenge to mask all those angles! Nice work!
Thanks! :)

Yeah, masking of the RAM paint on all edges will be fun :D

:cheers2:
Tommy
Try the F-35 Tommy...... that did my head in even at the "I'm blind scale" of 1/32.... mine is currently sitting on the shelf of doom
That thing is insane... did you use the masking set or cut the tape yourself ?

:cheers2:
Tommy

Re: Academy 1/72 F-22A Air Dominance Fighter

Posted: Tue Sep 11, 2018 10:39 pm
by Fridgy
TommyKillander wrote: Tue Sep 11, 2018 5:58 pm
Fridgy wrote: Tue Sep 11, 2018 12:35 pm
TommyKillander wrote: Tue Sep 11, 2018 6:22 am

Thanks! :)

Yeah, masking of the RAM paint on all edges will be fun :D

:cheers2:
Tommy
Try the F-35 Tommy...... that did my head in even at the "I'm blind scale" of 1/32.... mine is currently sitting on the shelf of doom
That thing is insane... did you use the masking set or cut the tape yourself ?

:cheers2:
Tommy
A bit of both
The masks that come in the kit doesn't cover everything

Re: Academy 1/72 F-22A Air Dominance Fighter

Posted: Sun Nov 11, 2018 9:23 pm
by TommyKillander
Its Alive !! :eeek: :crazy:

I'm making an effort to push this over the finishing-line before the end of the year :tongue:

So... I haven't been too eager about fitting the resin engine... :shifty: I actually thought about skipping them and use the kit parts instead, but I decided to have a go at it :P

Image

Cleaning up and sanding the resin "wet" - I try to keep the parts that I'm working with and the tools wet all the time to keep control of the resin dust.

Image

Image

So the sidewalls needs to be replaced with resin parts... So I have to remove the existing walls :bash:

Image

Just gluing them in place will probably never work, so I decided to add some ribs to get the right distance.

Image

Image

Bottom part of the fuselage prepped, not let's continue with the upper half.

Image

The styrene-torture will be continued tomorrow :shock:

:cheers2:
Tommy