International Scale Modeller

Posted: **Sun Feb 23, 2020 11:55 pm**

OK folks - I am calling the Ka-18 build finished now. Bit of a nightmare of a kit - although mouldings on this one were relatively clean of flash and there were few if any ejector marks in visible places the overall fit left a bit to be desired - especially the glazing components. The instructions also left a LOT to be desired - particularly in regards to the complex twin rotor head head by Kamov.
Also there were no part numbers on the sprue, nor were there any sprue diagrams to aid in finding parts.

So - a challenging job and I'm the first to admit it could have been a lot better But not too bad, I think, for a return to the hobby after over many years.

Posted: **Mon Feb 24, 2020 12:05 am**

Ok even with the kit problems you made a great job of the beast and made it look right, cant fault that and to be honest I would have binned it long ago so well done and top work

Posted: **Mon Feb 24, 2020 12:21 am**

Hawkmoon wrote: ↑Mon Feb 24, 2020 12:05 am Ok even with the kit problems you made a great job of the beast and made it look right, cant fault that and to be honest I would have binned it long ago so well done and top work

Many thanks Hawkmoon - the kind words are much appreciated.

Posted: **Mon Feb 24, 2020 12:26 am**

Even after all the issues you had bud it’s still an impressive build!

Still absolutely love the livery/colors of it

Posted: **Mon Feb 24, 2020 12:31 am**

KalebB wrote: ↑Mon Feb 24, 2020 12:26 am Even after all the issues you had bud it’s still an impressive build!

Still absolutely love the livery/colors of it

Many thanks

Got to admit - the early red Aeroflot livery is more striking that the later blue ones. - and certainly suits the shape of this little beast.. When the -58 is finished I will post a pic of them side by side - you would not believe how much bigger the -58 is than the -18 whilst still being a 2-seat side-by-side configuration....

Posted: **Mon Feb 24, 2020 8:21 am**

I'm with Hawkmoon, I think I would have jumped up and down on it until it was tiny bits, so your patience and skill in actually making this look like the intended subject are to be commended!

Paul

Posted: **Fri Feb 28, 2020 2:20 pm**

I can only echo what the other guys have said mate - really well done for sticking with this nightmare of a kit and knocking into such a good finish!

Thanks for taking part, and for introducing us to another unusual subject

Posted: **Fri Feb 28, 2020 5:52 pm**

Nicely done
Count me in for a ride, I will watch from the ground!!!

Posted: **Sun Mar 01, 2020 8:37 pm**

RangerNeil wrote: ↑Sun Feb 23, 2020 11:55 pm OK folks - I am calling the Ka-18 build finished now. Bit of a nightmare of a kit - although mouldings on this one were relatively clean of flash and there were few if any ejector marks in visible places the overall fit left a bit to be desired - especially the glazing components. The instructions also left a LOT to be desired - particularly in regards to the complex twin rotor head head by Kamov.
Also there were no part numbers on the sprue, nor were there any sprue diagrams to aid in finding parts.

So - a challenging job and I'm the first to admit it could have been a lot better But not too bad, I think, for a return to the hobby after over many years.

stunning Neil A++

Posted: **Sun Mar 01, 2020 11:29 pm**

Meliodas2019 wrote: ↑Sun Mar 01, 2020 8:37 pm

stunning Neil A++

Thank you very much

Posted: **Wed Mar 04, 2020 12:30 pm**

Lovely presentation of a horrible kit.....marvelous paint work and of course the build.

Posted: **Wed Mar 04, 2020 9:54 pm**

digger303 wrote: ↑Wed Mar 04, 2020 12:30 pm Lovely presentation of a horrible kit.....marvelous paint work and of course the build.

Thanks Digger

Posted: **Fri Mar 27, 2020 9:18 am**

Great finish to a very poor kit, just shows you what skill can do

Posted: **Sat Sep 05, 2020 9:23 pm**

Great work done and great looking model!

Tommy

Posted: **Sun Sep 06, 2020 2:19 am**

TommyKillander wrote: ↑Sat Sep 05, 2020 9:23 pm Great work done and great looking model!

Tommy

Many thanks Tommy - one of these days I might get up to the levels you pulled off with the Harrier build

International Scale Modeller

Eastern Express 1/72 Kamov Ka-18

Eastern Express 1/72 Kamov Ka-18

Re: Eastern Express 1/72 Kamov Ka-18

Re: Eastern Express 1/72 Kamov Ka-18

Re: Eastern Express 1/72 Kamov Ka-18

Re: Eastern Express 1/72 Kamov Ka-18

Re: Eastern Express 1/72 Kamov Ka-18

Re: Eastern Express 1/72 Kamov Ka-18

Re: Eastern Express 1/72 Kamov Ka-18

Re: Eastern Express 1/72 Kamov Ka-18

Re: Eastern Express 1/72 Kamov Ka-18

Re: Eastern Express 1/72 Kamov Ka-18

Re: Eastern Express 1/72 Kamov Ka-18

Re: Eastern Express 1/72 Kamov Ka-18

Re: Eastern Express 1/72 Kamov Ka-18

Re: Eastern Express 1/72 Kamov Ka-18