M1A1 ABRAMS Tamiya

AlkaSeltzer · Post by **AlkaSeltzer** » Mon Jan 12, 2015 10:32 pm

This will be my entry into the Modern Armour SIG. I am going to try to make this into a 1980's Cold War NATO AFV.

AlkaSeltzer · Post by **AlkaSeltzer** » Mon Jan 12, 2015 10:34 pm

This seems to be a pretty easy model to build.

AlkaSeltzer · Post by **AlkaSeltzer** » Mon Jan 12, 2015 10:35 pm

The parts look good with no apparent defects.

AlkaSeltzer · Post by **AlkaSeltzer** » Mon Jan 12, 2015 10:36 pm

I may use other tracks because the ones included seem to be weak.

AlkaSeltzer · Post by **AlkaSeltzer** » Tue Jan 13, 2015 11:30 pm

Got step #1 completed. WHEELS!

eightfooticeman · Post by **eightfooticeman** » Wed Jan 14, 2015 2:50 am

Another bad to the bone Abrams, loving it!

JediBoer · Post by **JediBoer** » Wed Jan 14, 2015 8:57 am

Sweet kit! Looking forward to the build!

schweinhund227 · Post by **schweinhund227** » Wed Jan 14, 2015 4:59 pm

in case you need it for the upper surface anti slip texture ?

http://s1086.photobucket.com/user/danb5 ... 4.jpg.html

good luck and Have fun mate !

AlkaSeltzer · Post by **AlkaSeltzer** » Wed Jan 14, 2015 11:08 pm

eightfooticeman wrote:Another bad to the bone Abrams, loving it!

Thanks

AlkaSeltzer · Post by **AlkaSeltzer** » Wed Jan 14, 2015 11:09 pm

JediBoer wrote:Sweet kit! Looking forward to the build!

Hope it comes together

AlkaSeltzer · Post by **AlkaSeltzer** » Wed Jan 14, 2015 11:09 pm

schweinhund227 wrote:in case you need it for the upper surface anti slip texture ?

http://s1086.photobucket.com/user/danb5 ... 4.jpg.html

good luck and Have fun mate !

COOL! Thanks

AlkaSeltzer · Post by **AlkaSeltzer** » Wed Jan 14, 2015 11:10 pm

Got a little more done. Seems to be going together pretty easy with no fit issues.

schweinhund227 · Post by **schweinhund227** » Thu Jan 15, 2015 1:44 am

If you guys use the Hull hanging APU..... ? As shown in picture above.

Do not install the Turret bustle APU! You would create a Frankenstein

The hull Hanging APU was tested that way...... In the mid 80's And later superseded with
The Turret bustle APU.... when fielded to the operational units!

Which later was superseded buy an Under Armour APU installed inside the Left Rear fuel cell! Which was later superseded by a Bank of batteries.... In the same fuel cell area. By then... The turret bustle APU had been replaced with an Air conditioning unit! Seen on the M1A2 SEP.

Good luck and happy modeling!

AlkaSeltzer · Post by **AlkaSeltzer** » Fri Jan 16, 2015 10:17 am

schweinhund227 wrote:If you guys use the Hull hanging APU..... ? As shown in picture above.

Do not install the Turret bustle APU! You would create a Frankenstein

The hull Hanging APU was tested that way...... In the mid 80's And later superseded with
The Turret bustle APU.... when fielded to the operational units!

Which later was superseded buy an Under Armour APU installed inside the Left Rear fuel cell! Which was later superseded by a Bank of batteries.... In the same fuel cell area. By then... The turret bustle APU had been replaced with an Air conditioning unit! Seen on the M1A2 SEP.

Good luck and happy modeling!

I will remember that thanks for pointing that out. I just got back into this and I'm not to sure about all the specs.

schweinhund227 · Post by **schweinhund227** » Fri Jan 16, 2015 11:12 am

It also dictates where the vehicle has served!

State side? Stationed in Germany or South Korea or served in Desert Storm 1 or 2
With the US Army or US Marines ? Or during OIF or OEF

Hope the instructions are clear ? .... Been a while since I made one!
usually Tamiya has done their research...

Take care! If you want to upgrade it? You can always shave off that Hull APU and
Make your tank a more recent one? There is still time.

Looking forward to your next update !

Happy modeling.

Gav0909 · Post by **Gav0909** » Fri Jan 16, 2015 9:41 pm

Coming on nicely there mate. I am building my Abrams just now as well.

Cheers Norm for the info on the APU, I did wonder why my SEP TUSK II had an air con unit in the bustle basket and not an APU.

schweinhund227 · Post by **schweinhund227** » Sat Jan 17, 2015 1:30 pm

Oh !

One point I forgot....

If you depict a M1A2 with an Under Armour APU.. ( APU inside left rear Fuel cell ) The Corresponding Fuel cap needs to be shaven off
if not done by the company ! Sometimes Model companies offer multiple variants and forget to give you the correct outline... and leave Artifact items on their moulds.... so!

Don't leave the Rear Left Fuel armored Cap on the Deck, if doing one of those... !
if you do older variants with APU in bustle ? or Hanging APU.. that fuel cap can stay...

Take care people.

Norm. OUT !

AlkaSeltzer · Post by **AlkaSeltzer** » Sun Jan 18, 2015 5:05 pm

Gav0909 wrote:Coming on nicely there mate. I am building my Abrams just now as well.

Cheers Norm for the info on the APU, I did wonder why my SEP TUSK II had an air con unit in the bustle basket and not an APU.

Thanks! I like your TUSK model of the Abrams

AlkaSeltzer · Post by **AlkaSeltzer** » Sun Jan 18, 2015 5:06 pm

schweinhund227 wrote:It also dictates where the vehicle has served!

State side? Stationed in Germany or South Korea or served in Desert Storm 1 or 2
With the US Army or US Marines ? Or during OIF or OEF

Hope the instructions are clear ? .... Been a while since I made one!
usually Tamiya has done their research...

Take care! If you want to upgrade it? You can always shave off that Hull APU and
Make your tank a more recent one? There is still time.

Looking forward to your next update !

Happy modeling.

Thanks Norm

AlkaSeltzer · Post by **AlkaSeltzer** » Mon Jan 19, 2015 11:07 pm

Between NHL 15 on my XBOX ONE and work and home life the build continues

AlkaSeltzer · Post by **AlkaSeltzer** » Tue Jan 20, 2015 11:26 pm

This is a real nice fitting model so far. I got a little more done this evening.

DBMiller · Post by **DBMiller** » Wed Jan 21, 2015 2:00 pm

I love the Abrams! Nice work on this so far, too. Say all you want about those new, super detailed kits with a thousand parts, but I really like those good old Tamiya kits!

schweinhund227 · Post by **schweinhund227** » Wed Jan 21, 2015 2:12 pm

Nothing wrong with Tamiya kits as you mentioned....
its true... No anti slip surface but... ease of assembly is second to none !

I rather build them... than an over engineered DML Dragon !
although... Their upcoming release will be hard to beat ! its still going to be overwhelming thou...

If only they could work on their instructions....

as for this Build !

You are doing great progress and Glad you are enjoying Tamiya engineering !

save up and get their TUSK 2 it is a nice kit !

Later mate !

PaulAyrey · Post by **PaulAyrey** » Wed Jan 21, 2015 8:05 pm

Coming along nicely, looks great.

AlkaSeltzer · Post by **AlkaSeltzer** » Fri Jan 23, 2015 11:27 pm

DBMiller wrote:I love the Abrams! Nice work on this so far, too. Say all you want about those new, super detailed kits with a thousand parts, but I really like those good old Tamiya kits!

Thanks I agree Dragon does seem to over do it for my skill level sometimes.

AlkaSeltzer · Post by **AlkaSeltzer** » Fri Jan 23, 2015 11:27 pm

PaulAyrey wrote:Coming along nicely, looks great.

Thanks

AlkaSeltzer · Post by **AlkaSeltzer** » Fri Jan 23, 2015 11:29 pm

schweinhund227 wrote:Nothing wrong with Tamiya kits as you mentioned....
its true... No anti slip surface but... ease of assembly is second to none !

I rather build them... than an over engineered DML Dragon !
although... Their upcoming release will be hard to beat ! its still going to be overwhelming thou...

If only they could work on their instructions....

as for this Build !

You are doing great progress and Glad you are enjoying Tamiya engineering !

save up and get their TUSK 2 it is a nice kit !

Later mate !

Thanks the TUSK does look bad azz. I saw your pictures and my skill level is not yet up to your level but I am trying. Thanks for the kind words

AlkaSeltzer · Post by **AlkaSeltzer** » Tue Jan 27, 2015 10:21 pm

Just started with the beginning paint job.

eightfooticeman · Post by **eightfooticeman** » Tue Jan 27, 2015 10:24 pm

It's Alive!

Russ72 · Post by **Russ72** » Tue Jan 27, 2015 10:33 pm

Nice stuff.

AlkaSeltzer · Post by **AlkaSeltzer** » Thu Jan 29, 2015 12:21 am

eightfooticeman wrote:It's Alive!

lOL thanks

AlkaSeltzer · Post by **AlkaSeltzer** » Thu Jan 29, 2015 12:22 am

Russ72 wrote:Nice stuff.

thanks I'm trying to take my time and get the paint job good.

eightfooticeman · Post by **eightfooticeman** » Tue Mar 03, 2015 10:57 pm

Just a reminder, we are nearing the finish line on this Sig. I'm sure you will make it as you're much farther than I am with my Abrams.

M1A1 ABRAMS Tamiya

M1A1 ABRAMS Tamiya

Re: M1A1 ABRAMS Tamiya

Re: M1A1 ABRAMS Tamiya

Re: M1A1 ABRAMS Tamiya

Re: M1A1 ABRAMS Tamiya

Re: M1A1 ABRAMS Tamiya

Re: M1A1 ABRAMS Tamiya

Re: M1A1 ABRAMS Tamiya

Re: M1A1 ABRAMS Tamiya

Re: M1A1 ABRAMS Tamiya

Re: M1A1 ABRAMS Tamiya

Re: M1A1 ABRAMS Tamiya

Re: M1A1 ABRAMS Tamiya

Re: M1A1 ABRAMS Tamiya

Re: M1A1 ABRAMS Tamiya

Re: M1A1 ABRAMS Tamiya

Re: M1A1 ABRAMS Tamiya

Re: M1A1 ABRAMS Tamiya

Re: M1A1 ABRAMS Tamiya

Re: M1A1 ABRAMS Tamiya

Re: M1A1 ABRAMS Tamiya

Re: M1A1 ABRAMS Tamiya

Re: M1A1 ABRAMS Tamiya

Re: M1A1 ABRAMS Tamiya

Re: M1A1 ABRAMS Tamiya

Re: M1A1 ABRAMS Tamiya

Re: M1A1 ABRAMS Tamiya

Re: M1A1 ABRAMS Tamiya

Re: M1A1 ABRAMS Tamiya

Re: M1A1 ABRAMS Tamiya

Re: M1A1 ABRAMS Tamiya

Re: M1A1 ABRAMS Tamiya

Re: M1A1 ABRAMS Tamiya