The parts of the figure before clean up. There are a few tabs to remove which should be relatively easy to remove and clean up and there are a few very tiny bits of flash that will easily be removed with a scalpel.
The base. I will paint this up and add some ballast, weeds and stuff.
The figure with the leg, right arm and head fitted. The leg fitted really well and was secured with a spot of CA glue. The arm required some filling as the fit was not quite as good as the leg but nothing to difficult. I used some CA gap filling glue with the excess being removed with some acetone on a cotton bud. The head is a really good fit and is not fixed as I will be painting it separately.
The guns, backpack, tools and other bits and pieces all cleaned up. These will all be painted separately and fitted afterwards.
All the parts were primed with Ultimate grey prior to painting. I have started by painting all the base colours on the figure using the base colours from the Andreas paint sets these are ACS-05 Blue, ACS-013 Brown, ACS-10 Field grey, ACS-02 Black and ACS-01 Flesh.
